You don't need a bootable installer to upgrade macOS or reinstall macOS, but it can be useful if you want to install macOS on multiple computers without downloading the installer each time, or you're unable to install a compatible macOS from the Finder or macOS Recovery.
How To Make A Boot Usb For Linux On Mac
For information about the createinstallmedia command and the arguments you can use with it, make sure that the macOS installer is in your Applications folder, then enter the appropriate path in Terminal:
This page discusses various multi-platform methods on how to create an Arch Linux Installer USB drive (also referred to as "flash drive", "USB stick", "USB key", etc) for booting in BIOS and UEFI systems. The result will be a Live USB (Live CD-like) system that can be used for installing Arch Linux, system maintenance or for recovery purposes, and that, because of using Overlayfs for /, will discard all changes once the computer shuts down.
If you would like to run a full install of Arch Linux from a USB drive (i.e. with persistent settings), see Install Arch Linux on a removable medium. If you would like to use your bootable Arch Linux USB stick as a rescue USB, see Change root.
Linux distributions running GNOME can easily make a live CD through nautilus and gnome-disk-utility. Simply right-click on the .iso file, and select Open With Disk Image Writer. When GNOME Disk Utility opens, specify the flash drive from the Destination drop-down menu and click Start Restoring.
where archlinux-version-x86_64.iso is the path to the iso image file within the cygwin directory and \\.\x: is your USB flash drive where x is the windows designated letter, e.g. \\.\d:.
This command will run silently. To view progress, send SIGINFO by pressing Ctrl+t. Note diskX here should not include the s1 suffix, or else the USB device will only be bootable in UEFI mode and not legacy. After completion, macOS may complain that "The disk you inserted was not readable by this computer". Select 'Ignore'. The USB device will be bootable.
Syslinux files for BIOS systems are already copied to /mnt/syslinux. Unmount the FAT file system, install the syslinux and mtools packages and run the following commands to make the partition bootable:
Ventoy is an open source tool to create bootable USB drive for ISO/WIM/IMG/VHD(x)/EFI files. With ventoy, you do not need to format the disk over and over, you just need to copy the ISO/WIM/IMG/VHD(x)EFI files to the USB drive and boot them directly. You can copy many files at a time and ventoy will give you a boot menu to select them. It is available as ventoy-binAUR.
This method uses Syslinux and a Ramdisk (MEMDISK) to load the entire Arch Linux ISO image into RAM. Since this will be running entirely from system memory, you will need to make sure the system you will be installing this on has an adequate amount. A minimum amount of RAM between 500 MB and 1 GB should suffice for a MEMDISK based, Arch Linux install.
Next copy the ISO that you would like to boot to the Boot/ISOs folder. After that, extract from the following files from the latest release of syslinux from here and copy them into the following folders.
On live images, you can include a feature called a persistent overlay, which allows changes made to persist across reboots. You can perform updates just like a regular installation to your hard disk, except that kernel updates require manual intervention and overlay space may be insufficient. Without a persistent overlay, the stick will return to a fresh state each time it is booted.
To make an existing USB stick bootable as a Fedora image, without deleting any of the data on it, make sure that the USB drive is not mounted before executing the following, and give the root password when prompted:
To enable 'data persistence' support - so changes you make to the entire live environment will persist across boots - add the --overlay-size-mb parameter to add a persistent data storage area to the target stick. For example:
UNetbootin may work in some cases but not others - for instance, it will likely create a stick that is bootable in BIOS mode, but not UEFI mode. Fedora cannot guarantee support for UNetbootin-written images.
While your results may vary, it is usually the case that the Fedora Media Writer, livecd-iso-to-disk, GNOME, and dd methods give better results than UNetbootin. If you encounter problems with UNetbootin, please contact the UNetbootin developers, not the Fedora developers.
UNetbootin is a graphical, bootable USB image creator. Using it will allow you to preserve any data you have in the USB drive. If you have trouble booting, however, you may wish to try with a blank, cleanly FAT32-formatted drive.
Download the latest UNetbootin version from the official site and install it. On Linux, the download is an executable file: save it somewhere, change it to be executable using chmod ugo+x filename or a file manager, and then run it.
As the machine starts to reboot, watch carefully for instructions on which key to press. Usually a function key, Escape, Tab, F11, F12 or Delete is to be pressed to enter the boot device selection menu, BIOS setup, firmware, or UEFI. Press and hold that key. If you miss the window of opportunity, often only a few seconds, then reboot and try again. (If this does not work, consult the manual of your computer)
Use the firmware, BIOS, interface or the boot device menu to put your USB drive first in the boot sequence. It might be listed as a hard drive rather than a removable drive. Each hardware manufacturer has a slightly different method for doing so.
If your system has a UEFI firmware, it will usually allow you to boot the stick in UEFI native mode or BIOS compatibility mode. If you boot in UEFI native mode and perform a Fedora installation, you will get a UEFI native Fedora installation. If you boot in BIOS compatibility mode and perform a Fedora installation, you will get a BIOS compatibility mode Fedora installation.
For more information on all this, see the UEFI page. USB sticks written from x86_64 images with Fedora Media Writer, GNOME Disk Utility, dd, other dd-style utilities should be UEFI native bootable. Sticks written with other utilities may not be UEFI native bootable, and sticks written from i686 images will never be UEFI bootable.
If your test boot reports a corrupted boot sector, or you get the message MBR appears to be blank., you need to install or reset the master boot record (MBR), by passing --reset-mbr when writing the stick.
livecd-iso-to-disk is not meant to be run from a non-Fedora system. Even if it happens to run and write a stick apparently successfully from some other distribution, the stick may well fail to boot. Use of livecd-iso-to-disk on any distribution other than Fedora is unsupported and not expected to work: please use an alternative method, such as Fedora Media Writer.
The topic of the best booting software is not exactly a number one issue for many people. However, there comes a time when we could all use a good USB boot tool. Why? This article aims to answer that question, and to give you a rundown of the best USB tools you can use. And the good news? Many of these booting softwares are free.
Bootable USB software allows you to make a copy of hardware information into a disk image, or ISO, and copy all of that data onto a single USB drive or pendrive, albeit using much less data. This lets you boot your computer off the software on the USB stick instead of its own BIOS (basic input output system). Think of it as your computer waking up with a new plugged-in identity, memory and capabilities.
If you want to create live USB drives without burning CDs, UNetbootin is a good choice. It works with Windows, Linux and macOS. You can burn drives for Ubuntu and other Linux distributions. It loads these distros by downloading ISO image files or using an ISO you already have.
RMPrepUSB is a partition and formatting tool that is built on the Windows 32-bit utility system. It helps you fix read-only protected SD cards as one of its features. For users of Windows 7, RMPrepUSB helps users create multiboot USB drives.
RMPrepUSB supports a very large list of ISO images. Using a FAT32 layout makes this a very speedy USB booting software. It even offers a great QEMU emulator (CPU emulator) tester to make sure you boot from a proper system, as well as an antivirus booter.
Universal USB Installer, or UUI as some call it, comes from Pendrivelinux.com. This is yet another open-source flash drive creation software for Linux. It is also commonly used as an antivirus tool. Many use Universal USB Installer as an installer drive for Microsoft Windows as well.
Also available from Pendrivelinux.com is Yumi, or your universal multiboot installer. When it comes to wanting to handle a variety of bootable media, Yumi is often a favorite choice because of its multiboot functionality.
Etcher is one of the newest USB booting software tools on the market. It writes image files from ISO to IMGs. You can also use it to create live USB and flash drives. Etcher has many safeguards in its coding to prevent accidentally wiping your hard disk.
UUByte ISO Editor is a suite of tools and features in the booting software scene. It supports Windows 10 and beyond as well as macOS Big Sur. This lets you burn ISO archives to flash drives, pendrives, CD or DVD. You can also make a bootable disk from Linux Live CD.
One thing you may have noticed is the lack of bootable options for mobile devices like Android phones. There are indeed other options for bootable USB creators for Android, like DriveDroid or EtchDroid. But when it comes to bootable USB flash drive software for desktops and laptops, we think this list has got you covered. While Rufus wins the day, we want to give an extra special shout-out to Yumi and Etcher for their excellence in USB bootable software.
Nowadays the PC or laptop mostly comes without CD/DVD drive. In this case, an USB flash drive or USB hard drive is the best way to boot Clonezilla live. You can follow the following to make a bootable Clonezilla live USB flash drive or hard drive using either:MS Windows
GNU/Linux
MacOS
Requirements:Microsoft Windows 7/8/10, GNU/Linux or MacOS.
Internet access for downloading a distribution to install, or a pre-downloaded ISO file.
A USB flash drive or USB hard drive has the MBR (msdos) partition table and a free partition. If you want to create a bootable USB flash drive/hard drive only for uEFI boot mode, it can be either GPT (recommended) or MBR (msdos) format.
.clonezilla_footer width: 320px; height: 100px; @media(min-width: 500px) .clonezilla_footer width: 468px; height: 60px; @media(min-width: 800px) .clonezilla_footer width: 728px; height: 90px; (adsbygoogle = window.adsbygoogle []).push();USB setup with MS Windows Depends on the boot mode for the machine you want to boot with the USB flash drive, choose one of the following methods to setup Clonezilla Live on your USB flash drive using MS Windows: 2ff7e9595c
Bình luận